Galinio pavarų perjungėjo ratukų komplektas CeramicSpeed for SRAM Eagle & Eagle AXS 1-12 Alloy 626 stainless steel gold (1033

SRAM’s 1x Eagle component system boasts a twelve-speed cassette. We have built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less friction, adding to the power transmitted to the rear wheel, greater durability, and going longer between replacement intervals. These pulleys are also fully compatible with the SRAM Eagle AXS derailleur. The upper and lower pulleys both have a narrow-wide tooth design. Both pulleys have 14 teeth.CeramicSpeed Standard Ceramic Bearings - low friction, high durabilityBearing race material: hardened-steelCompatible with all MTB 12-speed SRAM derailleurs: Eagle and Eagle AXSPulley material: aluminiumBearing type: 626In the box:2 x 14-tooth pulley wheels.CeramicSpeed Oil for Pulley Wheel Bearings, 15ml dropper bottle.CeramicSpeed All Round GreaseSticker sheetRELATED TECHNICAL INFORMATION:CeramicSpeed Standard Ceramic Bearings - put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. All Round Grease - Designed to suit the maintenance of CeramicSpeed Bearings, the CeramicSpeed All-Round Grease maximizes your bearings’ lifetime and performance. This type of grease is a low to medium viscosity lubricant and works as the best compromise between friction influence and lifetime. We recommend it for optimal use in dry and sunny weather conditions, where no or very little contamination threatens the bearing. The application covers mostly road riding conditions, however it can be used off-road in the same weather settings, on all types of CeramicSpeed Bearings. When lubricating your bearings, we recommend a fill rate of 60-80%.Maintenance:Depending on the riding conditions it is recommended once a year to re-grease your CeramicSpeed Bearings.If used in very wet or muddy conditions, maintenance might be required more often.If high pressure washer is used, please do not point jet stream to any of bearings (headset, bottom bracket, wheel hub, full suspension links) as it may wash out the grease. The kits come with CeramicSpeed oil in a 15ml dropper bottle. The bearings come with oil in them already. The oil is to keep them running smoothly.These pulleys need to be installed with stock SRAM pulley spacers between the cages. Save those before installing CeramicSpeed.